|
| |
NEWS |
The Current Position: Home - NEWS |
|
| How to reduce the wear of the clutch in the use of cars
|
| Release time：2016.05.19 News source： Browsing number： |
| |
Clutch wear is an old topic, but in the use of how to reduce wear and tear, but it is everyone's attention, and today we have to discuss.
In order to reduce clutch wear, first of all should be clear of the clutch slave cylinder structure is set on the transmission input shaft sleeve, is relying on the clutch pressure plate through the separation bearing to pump provides the return force, so the usual separation bearing always contact the pressure plate. When the clutch pedal, the clutch pressure plate and compression by separating the separation bearing to make. The driver steps on the clutch pedal, the engine transmission device and the transmission are disconnected, and the engine power is not transmitted to the wheel to drive the vehicle. When the driver releases the clutch, the transmission device of the engine can be connected with the transmission, so that the power can be transmitted to the wheel.
Note that the following methods can effectively reduce the wear of the clutch. Use the 1 stop to get the maximum torque at the start and reduce the clutch overload. Reduce the clutch is in a semi state, the use of the clutch pedal should be stepped in the end, after the use of completely loose, to ensure the complete separation of the clutch and reliable combination. The initial success as soon as possible after the loose clutch, reduce unnecessary friction clutch pressure plate and press.
Do not place the foot on the clutch pedal during normal running to ensure the full engagement of the clutch. Also in the city driving, deceleration not premature step on the clutch pedal, the speed down to a reasonable range and step down the clutch pedal, cut cluth run idle. When parking should pick neutral, release the clutch pedal so as to avoid increasing the burden of clutch. |
| |
|
